Lubricant Oil Additive-2
T202/T203/T154/T151/T153
T202–Zinc Butyl Octyl Primary Alkyl Dithiophosphate
T202 refers to Zinc Butyl Octyl Primary Alkyl Dithiophosphate (ZDDP). This product provides excellent anti-oxidation and anti-corrosion, and anti-wear and extreme pressure performance properties. It can effectively prevent engine bearing corrosion and oil viscosity increase due to high temperature oxidation. This product is light in color with good oil solubility and additive compatibility, widely used in various industrial lubricating oil applications like gear oil and hydraulic oil, as well as multiple grade engine oil formulation with the combination of detergent and dispersant. The recommended treat rate is 0.5%-3.0% (m%).
Technical Data:
- Appearance: Light yellow to amber transparent liquid
- Density (20℃), kg/m³：1080-1130
- Flash Point (COC), ℃：≥180
- pH value：≥5.5
- Zn Content, m%：8.5-10.0
- P Content, m%：7.2-8.5
- S Content, m%：14.5-18.0
- Color, number：≤2.0
- Water Content, m%：≤0.03
- Mechanical Impurities, m%：≤0.07
- The product is packed in iron drums with a net weight of 200kg, applicable to various modes of transportation.
- The maximum storage and transportation temperature shall not exceed 75℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years.
- This product is not flammable, explosive and corrosive, with no special protection required. In case of accidental contact with skin, wash it off thoroughly with water and detergents.
T203–Zinc Dioctyl Primary Alkyl Dithiophosphate
T203 refers to Zinc Dioctyl Primary Alkyl Dithiophosphate. This product features excellent oxidation and corrosion resistance, anti-wear, extreme pressure properties, and thermal stability in particular, and it offers favorable oil solubility, additive compatibility, and Demulsification as well. It is used in the formulation of premium diesel engine oils with the combination of sulphonate detergent and ashless dispersant, and in anti-wear hydraulic oils when combining with other additive packages. The recommended treat rate is 0.5%-3.0% (m%).
Technical Data:
- Appearance：Light yellow to amber transparent liquid
- Density (20℃), kg/m³：1060-1150
- Flash Point (COC), ℃：≥180
- pH value：≥5.8
- Zn Content, m%：8.5-10.5
- P Content, m%：7.5-8.8
- S Content, m%：14.0-18.0
- Color, number：≤2.0
- Water Content, m%：≤0.03
- Mechanical Impurities, m%：≤0.07
- The product is packed in iron drums with a net weight of 200kg, applicable to various modes of transportation.
- The maximum storage and transportation temperature shall not exceed 75℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years.
- This product is not flammable, explosive and corrosive, with no special protection required. In case of accidental contact with skin, wash it off thoroughly with water and detergents.
T154–Polyisobutylene Bi-Succinimide Ashless Dispersant
T154 Polyisobutylene Bi-Succinimide Ashless Dispersant manufactured with highly active polyisobutylene (Mn=1300), provides excellent detergency and dispersancy, which can inhibit the formation of carbon and varnish on engine pistons. This product is chlorine-free, and has good compatibility with detergent and ZDDP
Technical Data:
- Appearance：Transparent viscous liquid
- Kinematic Viscosity (100℃), mm2/s:130-230
- Flash Point (COC), ℃:≥180
- Total Base Number, mgKOH/g :15-30
- N Content, m%:1.1-1.4
- Color Number:≤4.0
- The product is packed in iron drums with a net weight of 170kg, applicable to various modes of transportation.
- The maximum storage and transportation temperature shall not exceed 75℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
- In case of accidental contact with skin, wash it off thoroughly with water and detergents.
T151–Polyisobutylene Mono-Succinimide Ashless Dispersant
T151 Polyisobutylene Mono-Succinimide Ashless Dispersant manufactured with highly active polyisobutylene (Mn=1300), performs well in low temperature dispersancy and increases the solubilization of high temperature soot. It is widely use in premium internal combustion engine oil formulations. This product is chlorine-free, and has good compatibility with detergent and ZDDP.
Technical Data:
- Appearance:Transparent viscous liquid
- Kinematic Viscosity (100℃), mm2/s:140-270
- Flash Point (COC), ℃:≥180
- Total Base Number, mgKOH/g :40-60
- N Content, m%:2.0-2.5
- Color Number:≤4.0
- The product is packed in iron drums with a net weight of 170kg, applicable to various modes of transportation.
- The maximum storage and transportation temperature shall not exceed 75℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
- In case of accidental contact with skin, wash it off thoroughly with water and detergents.
T153–High Nitrogen Polyisobutylene Mono-Succinimide Ashless Dispersant
T153 High Nitrogen Polyisobutylene Bi-Succinimide Ashless Dispersant manufactured with highly active polyisobutylene, through thermal process, provides excellent detergency and dispersancy, which can inhibit the formation of carbon and varnish on engine pistons, especially in low temperature sludge dispersancy. This product is chlorine-free, and has good compatibility with detergent and ZDDP.
Technical Data:
- Appearance:Transparent viscous liquid
- Flash Point (COC), ℃:≥180
- Total Base Number, mgKOH/g :60-80
- N Content, m%:2.9-3.5
- Color Number:≤4.0
- The product is packed in iron drums with a net weight of 170kg, applicable to various modes of transportation.
- The maximum storage and transportation temperature shall not exceed 75℃ in short term, and shall not exceed 45℃ in long term. The shelf life is 2 years, stored in dry, clean, ventilated warehouse.
- In case of accidental contact with skin, wash it off thoroughly with water and detergents.